The increasing number of new energy vehicles in life has also led to an increase in the number of projects that need to be tested. This is required in relevant standards such as IEC62196-1, IEC62752 and so on.

The drive over test is crucial to the safety of new energy vehicles.

Considering the force value required by the standard drive over test, the impact force of the tire and the safety of the operator, we designed and made this charging interface drive over test equipment.

It is used to carry out drive over test on vehicle charging plug, vehicle socket and function box of charging pile to judge their reliability after being rolled.

The equipment weighs 2 tons. We are responsible for installation and commissioning at the customer's site.

First of all, the vehicle charging plug and vehicle socket and the cable recommended by the manufacturer are loosely laid on the cement floor.

Use a car tire with the same load as P225/75R15 to apply a rolling force of (5000±250)N or (11000N±550)N, and roll over the charging plug or plug function at a speed of (8±2)km/h. Box (tire inflation pressure 220±10)kPa. It is used to simulate and test the ability of the power supply plug or plug function box to withstand vehicle crushing damage. This equipment has a device to prevent sample movement.

For more customized equipment and solutions, please contact us!