|
| Brand Name: | Sinuo |
| Model Number: | SN554 |
| MOQ: | 1 |
| Price: | Customized |
| Payment Terms: | T/T |
| Supply Ability: | 20 sets/month |
UL2580 Electric Vehicle Lithium Battery Cell Crush Testing Equipment
Complied Standards & Clauses
UL 2580:2020 STANDARD FOR SAFETY Batteries for Use In Electric Vehicles Annex B2.4 and Annex D3.3
IEC 62133-2012
UN38.3 ,UL 1642
Equipment Overview
Application: It is used to simulate all kinds of batteries in use, transportation, storage, or handling home waste, the battery suffers from squeezing and acupuncture.
Test Principle:
Extrusion: Place the battery between two plates,13.0 ± 0.78 kN of extrusion of 13.0 ± 0.78 kN is applied to the plate, and the battery should not occur outside, and fire and explosion.
Acupuncture:The test should be carried out at ambient temperature of 20 ° C ± 5 ° C,(the contact of the thermocouple is fixed on the large surface of the battery) the battery having a thermocouple is placed in a ventilation cabinet, pierced the center position of the largest surface of the battery with a diameter of 2-8 mm to 10 mm / s to 40 mm / s speed, maintain any time and observe the test result, t The battery does not explode, not fire is qualified.
Structure: One machine structure, the door uses explosion-proof lock + explosion-proof chain
Use Environment: System power supply three-phase power supply:AC380V±10%/50Hz 3KW.
Technical Parameters
| Control and Operation | PLC touch intelligent control system, remote control device. |
| Dimensions |
Inner box WDH=500×300×300mm,304 stainless steel Outer box WDH=940×780×1620mm,A3 Cold rolled steel plate paint, thickness 1.0mm Visual window WH=390×360,20mm Tempered explosion-proof glass + protective steel network double-layer protection |
| Drive mode | Hydraulic pressure |
| Unit conversion | Kg/N/Lb |
| Max. pressure | 1KN-20KN Adjustable, customized according to requirements |
| Piston diameter | 32mm |
| Crush/Nail Penetration Range | 0~200MM |
| Crush Accuracy | ±1% |
| Nail Penetration Test speed | 0-40mm/s(adjustable) |
| Battery Extrusion Head | Standard Extrusion Head, Area ≥ 20cm2 |
| Crushing Time Maintaining | 0~99hours59minutes59seconds |
| Steel Needle | φ5mm～φ8mm High temperature steel needle,Length 100mm(Specified). |
|
USB USB Interface |
With USB interface, test data can be exported |
| Accessibility | Explosion-proof pressure relief device, smoke exhaust device, explosion-proof chain |
| Purchase piece | Temperature capture, voltage collection system, video surveillance system |
