• IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment
  • IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment
  • IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment
  • IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment
Good price IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment online

IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment

Product Details:

Place of Origin: China
Brand Name: Sinuo
Certification: Calibration Certificate (Cost Additional)
Model Number: SNQC1010

Payment & Shipping Terms:

Minimum Order Quantity: 1
Price: Customized
Packaging Details: Export package
Delivery Time: 30 days
Payment Terms: T/T
Supply Ability: 5 sets/month
Contact Now

Detail Information

Applied Standard: IEC62196-1Ed.4 CDV 2020 Applied Clause: Clause 33.2 And 33.3
Crushing Force: 5000±250N / 11 000 ± 550 N Drive-over Speed: (8±2)km/h
Drive Mode: Motor Driven Tire Type: P225/75R15
Test Floor: Concrete Surface Tire Inflation Pressure: 220kPa±10kPa
High Light:

Plugs And Sockets Rolling Test Equipment

,

IEC62196 Rolling Test Equipment

Product Description

 

 

IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment

 

Complied Standards & Clauses


 

This equipment is in accordance with the vehicle rolling standard clauses in Section 6.21 of the GB/T 20234.1-2023 standard, and meets the test method requirements specified in Section 7.21 of the GB/T 20234.1-2023 standard, as well as IEC62752:2016 and IEC 62196-1Ed.4 CDV 2020 “Plug, socket-outlets, vehicle connectors and vehicle inlets–Conductive charging of electric vehicle-Part1: General requirements” clause 33.2 and 33.3.

 

Equipment Overview


 

Samples and restrictions: Supply plug, vehicle plug and function box with cables recommended by the manufacturer.

 

Test purpose: It is used for vehicle crush testing of charging vehicle power plugs; vehicle plugs and function boxes. To judge its reliability after pressure.

 

Test principle: Place the power plug and vehicle plug with the manufacturer's recommended cables loosely on the cement floor. Use automobile tires with the same load as P225/75R15 to apply a rolling force of (5000±250)N or (11000N±550)N. Roll the overcharged electric plug or plug function box at a speed of (8±2)km/h (tire inflation pressure 220±10)kPa. Use simulation to test the ability of the power supply plug or plug function box to withstand damage caused by vehicle crushing. The equipment is configured to prevent sample movement.

 

Technical Parameters


 

Test station Single station
Electrical control method PLC intelligent integrated control, 7-inch color human-machine touch interface operation
Operation mode Manual or program-controlled operation
Power system Motor plus worm gear acceleration and deceleration
Rolling stroke 0~2.0m
Carrying load

A: Rolling force (5000±250)N,

B: Rolling force (11000N±550)N

Switchable.

Rolling speed (8±2)km/h, speed adjustable
Rolling method It is driven by a linear motor module to simulate the forward and backward reciprocating motion of rolling tires. This simulates the damage caused by accidental crushing of the charging nozzle head of the charging pile when the car is moving forward or reversing in reality.
Rolling force adjustment Using weights, the force range is adjustable from 5000-11000N, and the weights are loaded and unloaded by cantilever crane.
Rolling tires

1. Equipped with one P225/75 R15 tire and one matching wheel hub. A set of tire inflation devices (inflation interface and air pressure gauge).

2. Equipped with 11000N load-bearing tires and a matching wheel hub.

Rolling tire pressure (220±10)kPa
Load bearing base plate Base plate with cement/concrete floor, can be equipped with fixing clamps.
Timing count display Touch screen design parameters can be set within standard requirements.
Deceleration method Our company has designed a braking mechanism to prevent rigid collisions.
Safety protection

IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment 0

The whole machine is equipped with a protective fence to prevent the wheels from accidentally deflecting and prevent mechanical injuries to personnel.

With leakage protection switch.

With motor overload protection.

 

 

Equipment Features


 

The entire equipment adopts a cold-rolled steel plate protective box structure design. The surface of the box is treated with Teflon paint. The bottom of the box is covered with simulated cement floor. The rolling mechanism can simulate a car tire sliding up and down freely after rolling over an object. The charging pile plugs bear the same pressure. The driving device drives the rolling mechanism to achieve forward and backward rolling movements. The main components are made of stainless steel and aluminum parts. Ensure that the tire is rolling over the sample under normal rolling conditions. The main features are as follows:

 

1. The equipment chassis is equipped with a protective cover to ensure the safety of the test process. The bottom of the box is equipped with shock-absorbing foot pads and a pulley structure for easy installation and disassembly. Guided by heavy-duty slide rails, the roller set slides. The power combined with a high -power motor combined with the turbine reducer, driving the spindle rotation, and the test speed is promoted for crushing test. The specimen fixing sliding device is equipped with a functional box installation fixture to meet standard requirements.

 

2. The rolling pressure adjustment device is designed with an upper and lower adjustable structure. The tires, upper and lower sliding frames and counterweights borne by the specimen are the total weight of the test.

 

3. The equipment adopts the working mode of front and rear tire drive: the test rolling direction is driven by the forward and reverse rotation of the motor to drive the tire rolling. Keep the specimen stationary. It can simulate the reciprocating rolling of car tires in the most realistic way. Effectively simulate rolling of the specimen.

 

4. The control system is an independent organization. The host machine is controlled by PLC and operated by touch screen. There are fixed mounting holes and cable openings at the bottom for easy fixing and connection.

IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment 1

 

Want to Know more details about this product
I am interested in IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment could you send me more details such as type, size, quantity, material, etc.
Thanks!
Waiting for your reply.