|
| Brand Name: | Sinuo |
| Model Number: | SN2217A |
| MOQ: | 1 |
| Payment Terms: | T/T |
| Supply Ability: | 10 Sets Per Month |
UL2594-2016 12KW AC380V Constant Temperature Water Bath Chamber
Complied Standards & Clauses
Conforms to UL2594-2016.
Product Overview
Samples and restrictions: Elevator cable center core.
Application: The constant temperature water bath chamber is equipment designed for testing the electrical performance of PVC plastic cables. An instrument suitable for testing AC withstands voltage, insulation resistance, water immersion capacitance increase rate, etc. on wires and cables.
It can be used in situations where the insulation resistance coefficient of 70°C or 90°C is specified in IEC502-83 "Measurement of Extruded Solid Dielectric Insulated Power Cables with Rated Voltage 1-30KV" or "National Standard for Plastic Cables".
This machine adopts a stainless steel inner tank, has a large container volume, is easy to operate and has good temperature stability. It is a plastic cable insulation testing equipment.
Technical Parameters
| Constant temperature range |
If the room temperature is lower than 10℃, 10-100℃ If the room temperature is higher than 10℃, the room temperature is -100℃ |
| Temperature fluctuation range | ±1℃ |
| Input voltage | AC380V,12KW |
| Heating control method | Non-contact solid-state relay |
| Temperature measuring thermocouple | Adopt waterproof high-precision PT100 |
| Cycle mode | Built-in high-temperature pump circulation method |
| Effective volume | DWH=900×1100×600mm. Inner box materials stainless steel 304 |
| Test hole | There are two test holes each with a diameter of 60mm and 100mm. |
Details
