|
| Brand Name: | Sinuo |
| Model Number: | SN2210-2 |
| MOQ: | 1 |
| Price: | Customized |
| Payment Terms: | T/T |
| Supply Ability: | 30 Sets / Month |
EV Connector Testing Equipment Standard Test Probe B IEC 62196
Complied Standards & Clauses
Conforms to IEC 62196-1:2022 clause 10.1. IEC 62196-1:2022 clause 10.1.
Equipment Overview
This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe consists of dito,finger,base and insulated handle which simulates the characteristics of the human hand. It has two movable joints, which can be curved at 90°.
Customizable: it can be used for anti-electric shock test when equipped with alligator clip, or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer, the pull and push dynamometer should be prepared by user).
Technical Parameters
| Model | SN2210-2 |
| Name | Standard Test Probe B |
| Joint 1 | 30±0.2 mm |
| Joint 2 | 60±0.2 mm |
| Fingertip cutting bevel angle | 37o 0 -10′ |
| Fingertip to baffle | 180±0.2 mm |
| Spherical | R4±0.05 mm |
| Test finger diameter | Ф50 mm |
| Fingertip taper | 14 o 0 -10′ |
| Applied standard | Ф12 0 -0.05 |
| A-A Section diameter | Ф50 mm |
| A-A Section width | 20±0.2mm |
| Baffle diameter | Ф75±0.2 mm |
| Baffle thickness | 5±0.5 mm |
| Cylindrical | R2±0.05 mm |
| Finger length | 80±0.2 mm |
Details:
