products details

Home Products

IPX3–IPX6 Waterproof Test Chamber Rain & Jet Spray Testing Equipment for Auto Parts

IPX3–IPX6 Waterproof Test Chamber Rain & Jet Spray Testing Equipment for Auto Parts

Brand Name:	Sinuo
Model Number:	SN4416-1000L
MOQ:	1
Payment Terms:	T/T
Supply Ability:	10 Sets Per Month

Detail Information

Product Description

Detail Information

Place of Origin:

China

Certification:

Calibration Certificate (Cost Additional)

Outer Chamber:

L1480*W3800*H1800mm

Inner Chamber:

L1000*W1000*H1000mm

Turntable Speed:

1 -5r/min (adjustable)

Turntable Diameter:

￠400mm

IPX6 Nozzle Jet Aperture:

12.5mm

IPX5 Nozzle Jet Aperture:

6.3mm

IPX5Jet Flow:

12.5±0.625

IPX6 Jet Flow:

100±5L/min

Packaging Details:

Export packing

Supply Ability:

10 Sets Per Month

Product Description

IPX3–IPX6 Waterproof Test Chamber Rain & Jet Spray Testing Equipment for Auto Parts

Complied Standards & Clauses

Conforms to IEC60529:1989 +A1:1999 +A2:2013 <Degrees of protection provided by enclosures(IP Code)> IPX3,IPX4, IPX5 and IPX6 test, figures 5 and figure 6.

Product Overview

The IPX3–IPX6 Waterproof Test Chamber is specially designed to evaluate the water resistance performance of products under simulated rain and jet spray conditions, in full compliance with IEC60529:1989+A1:1999+A2:2013 standards.

Water damage caused by rain, seawater, or humidity can lead to corrosion, deformation, or even electrical short circuits. This test chamber provides a reliable solution for testing the protection level of enclosures used in outdoor lighting, household appliances, automotive components, and electronic devices, ensuring their safety and durability in real-world environments.

Built with a high-quality steel exterior and SUS304 stainless steel inner chamber, the equipment ensures durability and long-term use without rust. A transparent tempered glass window and LED lighting allow easy observation during testing. It supports IPX3, IPX4, IPX5, and IPX6 waterproof rating tests, making it an ideal tool for product design verification, quality inspection, and factory testing.

Technical Parameters

Technical Parameters	Basic Parameters
	Inner Chamber Size	L1000W1000H1000mm
	Outer Chamber Size	L1480W3800H1800mm
	Equipment Total Wright	350kg
	Turntable Diameter	￠400mm
	Test Time	0-999 min
	Turntable Speed	1 -5r/min (adjustable)
	Flow Adjustment Method	Manually adjust flow with adjustable panel flow meter
	Turntable Rotation Method	Always positive / positive and negative alternate
	Turntable Maximum Load Bearing	30KG
	IPX34 Spray Nozzle Parameters
	Nozzle Fixed Method	Mechanical fixing
	Water Flow	10L/min±5%, flow meter is adjustable through rotameter, electronic flowmeter is optional
	Spray Distance	2.5M (nozzle away from the center of the turntable)
	Moving Shield	Made of aluminum, can be detachable
	Pressure	50～150Kpa, the pressure gauge measuring range: 0～0.25Mpa
	Parameters of Spray Nozzle	Outer diameter: Ф102mm, spherical diameter: SФ75.5mm, 1 hole at the center, 2 inner circles of 12 holes at 30° pitch,4 outer circles of 24 holes at 15° pitch , total 121 holes of Ф0.5mm, made of brass.
	IPX56 Jet Nozzle Parameters
	IPX5 Nozzle Jet Aperture	6.3mm
	IPX6 Nozzle Jet Aperture	12.5mm
	IPX5Jet Flow	12.5±0.625
	IPX6 Jet Flow	100±5L/min
	Water Pressure (Mpa)	Adjusted according to the specified water flow
	Jet Distance	2.5M (nozzle away from the center of the turntable)
	Nozzle Fixed Method	Mechanical fixing

Conditions of Use	The following conditions are guaranteed by the user and the corresponding connection is completed.
Use of Space	The ground is level, the drainage is smooth, floor and wall are waterproofing, Ground bearing capacity is not less than 200kg/㎡ Well ventilated No strong vibration around the device No strong electromagnetic field around the device No flammable, explosive, corrosive substances and dust around the equipment Appropriate use and maintenance space is left around the equipment: Rear side, left and right side, top of the equipment: 800mm; front side of equipment: 1400mm
Environmental Conditions	Temperature:5℃～35℃ Relative humidity: ≤85% Air pressure:86kPa～106kPa
Power Supply Conditions
Voltage, Frequency	AC380V±10% ; 50Hz±10% ; three-phase four-wire + protective ground wire
Power	3.0kW
Protective Grounding Resistance	Grounding resistance of protective grounding wire is less than 4Ω
Power Switch	1. The user is required to configure the leakage protection air switch of the corresponding capacity for the equipment at the installation site, and the switch must be used independently for the device. 2. It is forbidden to use the knife switch or power socket. 3. The leakage protection air switch is not more than 2 meters away from the equipment.
Water Source	1. The user is required to configure the water source for the equipment at the installation site, the water pressure is not less than 0.2Mpa, and the 4-point faucet is installed. 2. The position of the faucet is no more than 2 meters away from the equipment.

Details

Tags:

Electric Vehicle Testing Equipment

EVSE Testing Equipment

EV Connector Testing Equipment

EV Battery Testing Equipment

Walk In Environmental Test Chamber

Environmental Test Chamber

Temperature Humidity Test Chamber

Water Ingress Testing Equipment

Flammability Testing Equipment

Electrical Safety Testing Equipment

Electric Vehicle Testing Equipment

EVSE Testing Equipment

EV Connector Testing Equipment

EV Battery Testing Equipment

Walk In Environmental Test Chamber

Environmental Test Chamber

Temperature Humidity Test Chamber

Water Ingress Testing Equipment

Flammability Testing Equipment

Electrical Safety Testing Equipment

products details

IPX3–IPX6 Waterproof Test Chamber Rain & Jet Spray Testing Equipment for Auto Parts

IPX3–IPX6 Waterproof Test Chamber Rain & Jet Spray Testing Equipment for Auto Parts

IPX1 Water Ingress Testing Equipment

IPX5 Water Ingress Testing Equipment

IPX6 Water Ingress Testing Equipment

6 m³ Walk-in Sand and Dust Environmental Tester for Automotive Testing

IPX9 Vehicle Component Durability and Waterproof Performance Tester 1000L

500L IP5X and IP6X Dustproof Test Chamber for Automotive Parts IEC60529

IEC 60068-2-68 Floor Stand Large Sand and Dust Test Room Environmental Testing 6m³

IPX1/IPX2 Vertical Water Drop Test Chamber with 1000*1000mm Drip Area 0.4mm Drip Holes and 200mm Water Dripping Height