products details

Home Products

GOST 14254 Sand And Dust Test Chamber 2000L For Electronic Products Car

GOST 14254 Sand And Dust Test Chamber 2000L For Electronic Products Car

Brand Name:	Sinuo
Model Number:	SN441-2000L
MOQ:	1
Payment Terms:	T/T
Supply Ability:	10 Sets Per Month

Detail Information

Product Description

Detail Information

Place of Origin:

China

Certification:

Calibration Certificate (Cost Additional)

Inner Chamber Effective Capacity:

2m³

Nominal Wire Diameter:

≥50μm

Air Flow Rate:

1.5 M/s

Product Vacuum Degree:

≤60KPa

Standard Spacing Between Wires:

≥75μm

Dust Concentration:

2～4kg/m3

Inner Chamber Sizes:

2000*1000*1000mm（W*D*H）

External Chamber Sizes:

2400*1500*1900 Mm（W*D*H）

Packaging Details:

Export packing

Supply Ability:

10 Sets Per Month

Highlight:

2000L Sand And Dust Test Chamber

Car Sand And Dust Test Chamber

Sand And Dust Test Chamber

Product Description

GOST 14254 Sand And Dust Test Chamber 2000L for Electronic Products Car

Complied Standards & Clauses

Conforms to IEC60529 Fig 2 IP5X and IP6X, GOST 14254-2015 figure 8 and etc.

Product Overview

The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and motorcycles spare parts and seals. In order to detect the use, storage, transport performance of the electrical and electronic products, car and motorcycles spare parts and seals under the sand and dust environment.
The test equipment uses intelligent and humanized PLC control system, the inner of the test equipment is made of high quality SUS304 stainless steel, the enclosure is A3 plate electrostatic spraying. And it also has large observation window and manual wiper device. The security protection is good.

Technical Parameters

Volume and size
1.1 Inner chamber effective capacity	Approx. 2m³
1.2 Inner chamber sizes	200010001000mm(WDH)
1.3 External chamber sizes	Approx. 240015001900 mm(WDH)
2. Function parameters
2.1 Working room temperature	RT+10℃～+70℃
2.2 Product vacuum degree	≤60KPa
2.3 Dust composition	Talcum powder
2.4 Dust particle composition	Dry talc that can pass through a square mesh sieve with a mesh size of 75µm and a wire diameter of 50µm Additional 32 μm and 250 μm sieves will be offered
2.5 Dust concentration	2～4kg/m³
2.6 Air flow meter	Digital flow meter
2.7 Air flow rate	1.5 m/s (Adjustable range: 0 ~ 4.99 m/s)
2.8 Time Control	Dust blowing control cycle: 1s ~ 99h (adjustable), test time: 1s ~ 99h (adjustable), vibration time: 1S ~ 99H (adjustable)
2.9 Metal Screen	Nominal wire diameter: ≥50μm, standard spacing between wires: ≥75μm.
2.10 Sand and dust air circulation device	The circulating air duct and high-power mixed flow fan have an exhaust volume of 80 times the volume of the sample’s shell, and the exhaust speed does not exceed 60 times the volume of the shell per hour. The air flow speed can make the dust evenly distributed in the test chamber. The air flow in the test chamber is mainly vertical airflow from top to bottom, rather than laminar flow.
2.11 Sample rack	2 pcs -The presence of one shelf with the possibility of installation at different heights, made of perforated stainless steel panels with a load capacity of at least 50 kg -Metal panel of the floor of the test compartment, must provide a load capacity of at least 200 kg
2.12 Dust drying system	The equipment is equipped with a dust drying and heating device. There is a heating button on the controller control screen. When the dust is found to be a little damp during the test, the heating button on the control screen can be turned on to start the dust heating device to dry the dust. The button can be turned off after the dust is dry. The drying process will not affect the test process, effectively ensuring the dust concentration in the test chamber and the accuracy of the test data.
2.13 Dust replacement method	Manually change dust, dust can be easily replaced at any time

Details

Tags:

Electric Vehicle Testing Equipment

EVSE Testing Equipment

EV Connector Testing Equipment

EV Battery Testing Equipment

Walk In Environmental Test Chamber

Environmental Test Chamber

Temperature Humidity Test Chamber

Water Ingress Testing Equipment

Flammability Testing Equipment

Electrical Safety Testing Equipment

Electric Vehicle Testing Equipment

EVSE Testing Equipment

EV Connector Testing Equipment

EV Battery Testing Equipment

Walk In Environmental Test Chamber

Environmental Test Chamber

Temperature Humidity Test Chamber

Water Ingress Testing Equipment

Flammability Testing Equipment

Electrical Safety Testing Equipment

products details

GOST 14254 Sand And Dust Test Chamber 2000L For Electronic Products Car

GOST 14254 Sand And Dust Test Chamber 2000L For Electronic Products Car

2000L Sand And Dust Test Chamber

Car Sand And Dust Test Chamber

Sand And Dust Test Chamber

IPX1 Water Ingress Testing Equipment

IPX5 Water Ingress Testing Equipment

IPX6 Water Ingress Testing Equipment

IPX1 IPX2 Rain Test Vertical Rain Drip Proof Test System for Electronics

IPX3 IPX4 Handheld Nozzle Water Spray Water Ingress Testing Equipment

IPX3 IPX4 Water Spray Test Oscillating Tube IP Waterproof Testing Machine

Automotive Waterproof Testing Hot Water Spray Test Chamber IPX9

IPX9 High Pressure High Temperature Water Jetting Test Chamber

IPX8 Submersion Test Machine IEC 60529 IPX8 Waterproof Test Device

IPX7 Ingress Protection Test System IEC 60529 IPX7 Test Chamber

IPX3 IPX4 Spray Test IPX5 IPX6 Jet Test System Spray And Jet Nozzle Test Machine